There are many thickness of punching mesh, from 0.1mm-20mm can be customized production. Punching mesh is divided into two kinds of plate punching mesh and roll plate punching mesh, the two kinds of punching mesh production equipment is different, can produce different thickness, sheet plate punching mesh thickness from 0.1mm-20mm can be customized production, roll plate punching mesh thickness from 0.3mm-1.2mm between customized production.
The thickness of the punching net is customized according to the size of the aperture, under normal circumstances, the aperture size of the punching net should not be less than the thickness of the plate, that is, if the diameter of the round hole is 3mm, the punching net thickness can only be 3mm thick, 3mm can be produced below, and more than 3mm can not be produced.
2024-08-27
2024-10-05
2024-10-11
2024-09-30
2024-09-27
2024-09-18
2024-10-28
2024-09-29
2024-09-17
2024-09-17