Punched metal

Home > Punched metal > Aluminium plate Punched metal >

5052 Aluminium plate Punched metal

Source:www.cn-psp.cnAuthor:河北森驰公司 Last updated:2024-04-27 14:03 Browse:

Email:342096438@qq.com
We focus on the processing and customization of metal perforated plate, if you need to process customized or wholesale any metal perforated plate products, you can send us an email for consultation.

Product overview

5052 Aluminium plate Punched metal Products

5052 Aluminium plate Punched metal display

5052 Aluminium plate Punched metal Product Introduction
5052 Aluminium plate Punched metal is a mesh product made of 5052 aluminum plate processed on a CNC punching machine.
Sheet size
Plate width: 50mm-2000mm can be customized production.
Sheet length: sheet 5052 Aluminium plate Punched metal length 50mm-6000mm can be customized production, roll plate 5052 Aluminium plate Punched metal length between 6 meters -300 meters can be customized production.
Sheet thickness
The thickness of 5052 Aluminium plate Punched metal can be customized from 0.3mm-20mm.
Plate material
5052 Aluminium plate Punched metal is made of 5052 aluminum sheet.
silicon（Si）：≤0.25%
Copper element（Cu）：≤0.10%
magnesium（Mg）：2.2%~2.8%
zinc（Zn）：≤0.10%
manganese（Mn）：≤0.10%
Chromium element（Cr）：0.15%～0.35%
Iron element（Fe）：≤0.40%
Aluminium element（Al）：margin
Note: Single:≤0.05%;In total:In total:≤0.15%
Pass selection
5052 Aluminium plate Punched metal has round hole, oval hole, round hole, square hole, square hole, triangle hole, five-pointed star hole, hexagonal hole, figure eight hole, cross hole, square hole, zigzag hole, herringbone hole, H hole, diamond hole, fish scale hole, nail hole, bridge hole, louver hole, round drum hole, crocodile mouth hole and other holes, special hole support to map and sample processing custom.
Aperture size
5052 Aluminium plate Punched metal The aperture size from 1mm-300mm can be customized production, part of the aperture has a ready-made mold.
Pitch of holes
5052 Aluminium plate Punched metal hole spacing in the plate thickness of more than 1.5 times can be customized production.
5052 Aluminium plate Punched metal deep processing
5052 Aluminium plate Punched metal can be bent, roll, cutting, laser cutting, electrostatic powder spraying, anodic oxidation and other forms of deep processing.